Jump to content


Strujni Kablovi


Krca44

Recommended Posts

8 minuta ranije, miletrosak1959 said:

Red copper is a fancy name for beryllium which is not a pure copper.

Хвала, ту бесмислицу сам и ја пронашао Берилијум је редак тврд метал сиве боје који се чист нигде не употребљава. Можда су мислили на легуру од 3% берилијума и остатак бакра који се често употребљава за контакте али увек превучен златом или калајем .

Link to comment
Share on other sites

2 minuta ranije, Solderer said:

Хвала, ту бесмислицу сам и ја пронашао Берилијум је редак тврд метал сиве боје који се чист нигде не употребљава. Можда су мислили на легуру од 3% берилијума и остатак бакра који се често употребљава за контакте али увек превучен златом или калајем .

Dodaju mu berilijum zbog tvrdoce i lakse obrade jer bi cist bakar bio mek.

Link to comment
Share on other sites

3 minuta ranije, miletrosak1959 said:

Dodaju mu berilijum zbog tvrdoce i lakse obrade jer bi cist bakar bio mek.

Red copper је значи берилијум бакар? Не верујем. Имао сам масивне терминале за звучнике Едисон Пост који су били израђени од берилијум бакра без икакве заштите. За кратко време би попримили браон боју бакар оксида. Ми још увек не знамо шта Кинези називају '' црвени бакар''.

Link to comment
Share on other sites

2 minuta ranije, Solderer said:

Red copper је значи берилијум бакар? Не верујем. Имао сам масивне терминале за звучнике Едисон Пост који су били израђени од берилијум бакра без икакве заштите. За кратко време би попримили браон боју бакар оксида. Ми још увек не знамо шта Кинези називају '' црвени бакар''.

Ma pusti kineze gledaj malo sta ozbiljne firme rade.

Link to comment
Share on other sites

Јесте ли проверили стање контаката у разводној кутији из које се рачвају каблови за вашу аудио утичницу? Ту нема никакве егзотике, већ су огољени крајеви  каблова или уврћени међусобно ( стари стил) или су неке редне стезаљке сумњивог квалитета. На једном крају Ватгејт, а на другом лабава клема од ко зна каквог метала.Ја сам једног дана скинуо одговарајуће осигураче, и јаком лемилицом залемио међусобно све упредене крајеве и трајно решио проблем деградације контаката. Ништа не кошта, а потенцијална корист је у рангу специјалних конектора о којима се прича.

Link to comment
Share on other sites

9 minuta ranije, miletrosak1959 said:

Ma pusti kineze gledaj malo sta ozbiljne firme rade.

Претраживао сам мало, '' црвени бакар'' је кинески назив за нешто. А и те озбиљне фирме то набављају од Кинеза. Дај ми неки линк озбиљне фирме где објашњавају разлику обичан/црвени бакар.

Link to comment
Share on other sites

Кавог би тек квалитета били снимци Битлса, Ролинг Стоунса , Цепелина итд. да су продуценти знали за црвени бакар, родијум и ширмоване струјне каблове?
Tehnika snimanja traži nešto drugo .
Za rodijum tu nema mesta , itd ....

Послато са SM-G965F уз помоћ Тапатока

Link to comment
Share on other sites

Copper Beryllium alloys

In the fully heat-treated and cold-worked condition, copper beryllium is the hardest (HV 100–420) and strongest (tensile strength 410–1400 N/mm2) of any copper alloy.

It is similar in mechanical properties to many high strength alloy steels but, compared to steel, it has better corrosion resistance (approximately equivalent to nickel silvers), higher electrical conductivity (16–65% IACS) and higher thermal conductivity (210W/moC). It is also non-sparking and non-magnetic.

Applications

These high performance alloys have long been used for non-sparking tools in the mining, gas and petrochemical industries. Because of the excellent fatigue resistance, copper beryllium is widely used for springs, pressure responsive diaphragms, flexible bellows, connectors, contacts and relays, which are all subject to cyclic loading.

The anti galling, strength and good corrosion resistance led to the widespread use of copper beryllium for downhole drilling tools for the oil and gas industry.

Link to comment
Share on other sites

Copper Beryllium alloys

In the fully heat-treated and cold-worked condition, copper beryllium is the hardest (HV 100–420) and strongest (tensile strength 410–1400 N/mm2) of any copper alloy.

It is similar in mechanical properties to many high strength alloy steels but, compared to steel, it has better corrosion resistance (approximately equivalent to nickel silvers), higher electrical conductivity (16–65% IACS) and higher thermal conductivity (210W/moC). It is also non-sparking and non-magnetic.

Applications

These high performance alloys have long been used for non-sparking tools in the mining, gas and petrochemical industries. Because of the excellent fatigue resistance, copper beryllium is widely used for springs, pressure responsive diaphragms, flexible bellows, connectors, contacts and relays, which are all subject to cyclic loading.

The anti galling, strength and good corrosion resistance led to the widespread use of copper beryllium for downhole drilling tools for the oil and gas industry.

Ne kaže ništa za audio kablove i konektore ...... možda je u pitanju sumnjiv izvor informacija. Sigurno je to u pitanju !

Послато са SM-G965F уз помоћ Тапатока

Link to comment
Share on other sites

16 minuta ranije, 13071977 said:

Tehnika snimanja traži nešto drugo .
Za rodijum tu nema mesta , itd ....

Послато са SM-G965F уз помоћ Тапатока
 

Ако све ово побољшава рад хардвера за репродукцију, морало би да то исто чини и у ланцу продукције. Јер аудио сигнал је и тамо и овде. Ако се пред. чује боље, морао би и студијски магнетофон или микрофонско пред. итд.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...